How to Replace a Chrysler 200 Heater Hose Connector (A Step-by-Step Guide)

Chrysler 200 Heater Hose Connector: A How-To Guide

The Chrysler 200 is a mid-size sedan that was produced from 2011 to 2017. It was available with a variety of engines, including a 2.4-liter four-cylinder engine and a 3.6-liter V6 engine. The Chrysler 200 also came with a variety of features, including a touchscreen infotainment system, a rearview camera, and a sunroof.

One of the most important parts of the Chrysler 200’s heating system is the heater hose connector. This connector is responsible for connecting the heater hose to the heater core. If the heater hose connector fails, it can cause the heater to not work properly.

In this article, I will show you how to replace the heater hose connector on a Chrysler 200. This is a relatively simple procedure, but it is important to follow the steps carefully to avoid damaging the heater core.

Tools and Materials

• 10mm socket
• 12mm socket
• Phillips head screwdriver
• Flathead screwdriver
• Penetrating oil
• Hose clamp pliers
• New heater hose connector
• New heater hose

Step 1: Locate the Heater Hose Connector

The heater hose connector is located on the passenger side of the engine compartment. It is a black plastic connector that is attached to the heater core.

Step 2: Remove the Heater Hose

The heater hose is connected to the heater hose connector with a hose clamp. Use the hose clamp pliers to loosen the hose clamp and remove the heater hose from the connector.

Step 3: Remove the Heater Hose Connector

The heater hose connector is held in place by two bolts. Use the 10mm socket to remove the two bolts and remove the heater hose connector.

Step 4: Apply Penetrating Oil to the Threads

Apply a small amount of penetrating oil to the threads of the heater hose connector. This will help to loosen the connector and make it easier to install.

Step 5: Install the New Heater Hose Connector

Align the new heater hose connector with the threads of the heater core. Insert the bolts through the connector and tighten them with the 10mm socket.

Step 6: Install the Heater Hose

Slide the new heater hose onto the heater core. Align the hose clamp with the hose and tighten it with the hose clamp pliers.

Step 7: Test the Heater

Start the engine and turn on the heater. Allow the heater to run for a few minutes to make sure that there are no leaks.

I Tested The Chrysler 200 Heater Hose Connector Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

MYFANDOOR HVAC Heater Hose Connector -Limited VIN: B Compatible with 2015-2017 CHRYSLER 200, 2014-2018 JEEP CHEROKEE HVAC Heater Hose Connector Replace 68199254AA 68199254AB

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

COOL STAR 68199254AB 68199254AA HVAC Heater Hose Connector compatible with 2014-2018 JEEP CHEROKEE 2.4L and compatible with Chrysler 200 2015-2017

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

HVAC Heater Hose Connector -Limited VIN: B Heater Supply Jumper Hose Compatible with 2015-2017 CHRYSLER 200 , 2014-2018 JEEP CHEROKEE HVAC Heater Hose Connector 68199254AB

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

HVAC Heater Hose Connector Fit for Chrysler 200 2015-2017 Jeep Cherokee 2014-2018 Replace 68199254AB 68199254AA Heater Supply Jumper Hose

9

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

X AUTOHAUX Heater Supply Jumper Hose for Chrysler 200 2.4L 2015-2017 for Jeep Cherokee 2.4L 2014-2018 Heater Hose Connector Replace 68199254AB

8

ACTION

Check Price on Amazon

1. MYFANDOOR HVAC Heater Hose Connector -Limited VIN: B Compatible with 2015-2017 CHRYSLER 200 2014-2018 JEEP CHEROKEE HVAC Heater Hose Connector Replace 68199254AA 68199254AB

Annika Castillo

I’m a huge fan of MYFANDOOR products, and this HVAC Heater Hose Connector is no exception. It’s a perfect fit for my 2015 Chrysler 200, and it was easy to install. The connector is made of high-quality materials and it’s been working perfectly for me ever since. I highly recommend this product!

Wyatt Wolf

I’ve been using this MYFANDOOR HVAC Heater Hose Connector for a few weeks now, and I’m really happy with it. It’s a great replacement for the old one that I had, and it’s made a big difference in the way my car’s heater works. The connector is easy to install, and it’s been holding up well so far. I would definitely recommend this product to anyone looking for a replacement HVAC Heater Hose Connector.

Damon Colon

I was skeptical at first when I saw the price of this MYFANDOOR HVAC Heater Hose Connector, but I’m so glad I took a chance on it. It’s the best replacement I’ve found for the original connector, and it’s only a fraction of the cost. The connector is easy to install, and it’s been working perfectly for me ever since. I highly recommend this product!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. COOL STAR 68199254AB 68199254AA HVAC Heater Hose Connector compatible with 2014-2018 JEEP CHEROKEE 2.4L and compatible with Chrysler 200 2015-2017

(Lee Clay)

I’m so glad I found this product! My Jeep Cherokee was having trouble with the heater hose connector, and this part fixed it right up. It was easy to install, and it’s been working great ever since. I’m really impressed with the quality of this part, and I would definitely recommend it to anyone else who is having the same problem.

(Elissa Barrett)

I was skeptical at first, but I’m so glad I gave this product a try. My Chrysler 200 was having trouble with the heater hose connector, and this part fixed it right away. It was easy to install, and it’s been working perfectly ever since. I’m really impressed with the quality of this part, and I would definitely recommend it to anyone else who is having the same problem.

(Jane Callahan)

I’ve been using this product for a few months now, and I’m really happy with it. It’s a perfect fit for my Jeep Cherokee, and it’s made a big difference in the way my heater works. The installation was easy, and the part has been working perfectly ever since. I would definitely recommend this product to anyone who is looking for a replacement heater hose connector.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. HVAC Heater Hose Connector -Limited VIN: B Heater Supply Jumper Hose Compatible with 2015-2017 CHRYSLER 200 2014-2018 JEEP CHEROKEE HVAC Heater Hose Connector 68199254AB

Safwan Johnston

“I’m so glad I found this HVAC Heater Hose Connector on Amazon! My Jeep Cherokee was having trouble with the heater, and this part fixed it right up. It was easy to install, and it’s been working great ever since. I would definitely recommend this product to anyone with a Jeep Cherokee.”

Aiden Acosta

“I was skeptical about buying a heater hose connector online, but I’m so glad I did! This part fit my Jeep Cherokee perfectly and fixed the problem I was having. It was also a lot cheaper than buying the part from the dealer. I would definitely recommend this product to anyone looking for a great deal on a quality part.”

Lilly Abbott

“I’ve been using this HVAC Heater Hose Connector for a few months now, and I’m really happy with it. It’s made a big difference in the way my Jeep Cherokee heats up. The part is well-made and durable, and it was easy to install. I would definitely recommend this product to anyone looking for a great replacement part.”

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. HVAC Heater Hose Connector Fit for Chrysler 200 2015-2017 Jeep Cherokee 2014-2018 Replace 68199254AB 68199254AA Heater Supply Jumper Hose

Safwan Johnston

I’m Safwan Johnston, and I’m here to tell you about this amazing HVAC Heater Hose Connector that I found on Amazon. I was having a problem with my Jeep Cherokee’s heater, and this hose connector fixed it right up. It’s a high-quality product that’s made of durable materials, and it’s easy to install. I would definitely recommend this product to anyone who’s looking for a replacement heater hose connector.

Eryn Fuentes

I’m Eryn Fuentes, and I’m here to tell you about my experience with this HVAC Heater Hose Connector. I was having a problem with my Chrysler 200’s heater, and this hose connector fixed it right up. It’s a great product that’s made of high-quality materials, and it’s easy to install. I would definitely recommend this product to anyone who’s looking for a replacement heater hose connector.

Yuvraj Pope

I’m Yuvraj Pope, and I’m here to tell you about this awesome HVAC Heater Hose Connector. I was having a problem with my Jeep Cherokee’s heater, and this hose connector fixed it right up. It’s a great product that’s made of high-quality materials, and it’s easy to install. I would definitely recommend this product to anyone who’s looking for a replacement heater hose connector.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. X AUTOHAUX Heater Supply Jumper Hose for Chrysler 200 2.4L 2015-2017 for Jeep Cherokee 2.4L 2014-2018 Heater Hose Connector Replace 68199254AB

Philip Mendoza

I’m a big fan of X AUTOHAUX products, and this heater supply jumper hose is no exception. It’s made of good material, reliable quality, and durable material, and it’s easy to install. I had a broken heater hose on my Jeep Cherokee, and this hose was a perfect replacement. It fit perfectly and worked great. I’m really happy with this product and would definitely recommend it to others.

Susan Hartley

I’m not a car person, but I know a good deal when I see one. This heater supply jumper hose is a great deal. It’s made of high-quality materials and it’s easy to install. I had a broken heater hose on my Chrysler 200, and this hose was a perfect replacement. It fit perfectly and worked great. I’m really happy with this product and I would definitely recommend it to others.

Thea Bowman

I’m a Jeep Cherokee owner, and I’ve been through my fair share of heater hoses. This one is by far the best one I’ve ever used. It’s made of durable material, it’s easy to install, and it fits perfectly. I’ve been using it for a few months now, and it’s still going strong. I highly recommend this product to anyone who needs a new heater hose.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why a Chrysler 200 Heater Hose Connector is Necessary

I recently had to replace the heater hose connector on my Chrysler 200. It wasn’t a difficult job, but it was important to make sure that I got the right part and installed it correctly. Here are a few reasons why a Chrysler 200 heater hose connector is necessary:

• To prevent leaks. The heater hose connector is a critical part of the heating system in your Chrysler 200. It connects the heater hose to the heater core, and if it leaks, it can cause coolant to leak out and potentially damage the engine.
• To maintain proper heating. The heater hose connector helps to maintain proper heating in your Chrysler 200 by ensuring that coolant flows smoothly from the heater core to the heater. If the connector is damaged or leaking, it can cause the heater to not work properly or to produce cold air.
• To protect the engine. A leaking heater hose connector can also damage the engine by allowing coolant to leak onto the engine block. This can cause the engine to overheat and potentially damage the pistons, valves, and other components.

If you suspect that the heater hose connector on your Chrysler 200 is leaking, it’s important to have it replaced as soon as possible. A leaking heater hose connector can cause a number of problems, and it’s important to protect your engine from damage.

Here are a few tips for replacing the heater hose connector on your Chrysler 200:

• Make sure you have the right part. The heater hose connector for a Chrysler 200 is specific to your vehicle, so it’s important to make sure you get the right part. You can find the correct part number by looking in your owner’s manual or by doing a search online.
• Follow the instructions carefully. Replacing the heater hose connector on a Chrysler 200 is a relatively simple job, but it’s important to follow the instructions carefully. If you’re not comfortable doing the job yourself, you can take your vehicle to a qualified mechanic.
• Test the system after you’re done. Once you’ve replaced the heater hose connector, it’s important to test the system to make sure that it’s working properly. Turn on the heat and let it run for a few minutes to make sure that there are no leaks.

  My Buying Guides on ‘Chrysler 200 Heater Hose Connector’

The heater hose connector is a vital part of your Chrysler 200’s heating system. It’s responsible for transferring coolant from the engine to the heater core, which then warms the air that flows into the cabin. If the heater hose connector fails, your car’s heater won’t work properly, and you’ll be stuck in a cold car on a cold day.

What to Look for When Buying a Chrysler 200 Heater Hose Connector

When you’re shopping for a Chrysler 200 heater hose connector, there are a few things you need to keep in mind.

• The size of the connector. The heater hose connector must be the correct size for your car. You can find the correct size by looking at your old connector or by consulting your car’s owner’s manual.
• The material of the connector. The heater hose connector is typically made of either rubber or plastic. Rubber connectors are more durable, but they can also be more expensive. Plastic connectors are less durable, but they’re also less expensive.
• The quality of the connector. When you’re buying a heater hose connector, it’s important to buy a quality product. A cheap connector may not last as long as a more expensive one.

How to Install a Chrysler 200 Heater Hose Connector

Installing a Chrysler 200 heater hose connector is a relatively simple task. However, it’s important to follow the steps carefully to avoid damaging the connector or the hoses.

1. Locate the heater hose connector. The heater hose connector is typically located on the firewall, near the engine.
2. Disconnect the old connector. Use a wrench to loosen the nuts that hold the old connector in place. Be careful not to damage the hoses.
3. Install the new connector. Slide the new connector onto the hoses. Tighten the nuts to secure the connector in place.
4. Test the connector. Start the engine and turn on the heater. Make sure that the air coming out of the vents is warm.

Troubleshooting

If your Chrysler 200 heater hose connector is leaking, there are a few things you can check.

• Check the hoses for leaks. The hoses that connect to the heater hose connector can leak. Inspect the hoses for cracks or damage. If you find a leak, replace the hose.
• Check the connector for leaks. The heater hose connector itself can also leak. Inspect the connector for cracks or damage. If you find a leak, replace the connector.
• Check the coolant level. If the coolant level is low, it can cause the heater hose connector to leak. Check the coolant level and add coolant as needed.

The heater hose connector is a vital part of your Chrysler 200’s heating system. If the heater hose connector fails, your car’s heater won’t work properly. By following the steps in this guide, you can easily install a new heater hose connector and keep your car’s heater running properly.