How I Tested and Replaced the Door Heater Actuator Blend on My Chevy/GMC

Door Heater Actuator Blend: What It Is and How to Repair It

If you’re experiencing problems with the door heater in your Chevy or GMC vehicle, it’s possible that the door heater actuator blend is to blame. The door heater actuator blend is a small motor that controls the flow of hot air to the door heater. When it fails, the door heater may not work properly, or it may only work on one side of the vehicle.

In this article, I’ll explain what the door heater actuator blend is, how it works, and how to repair it if it fails. I’ll also provide some tips on how to prevent future problems.

What is the Door Heater Actuator Blend?

The door heater actuator blend is a small motor that controls the flow of hot air to the door heater. It’s located in the door panel, near the door hinge. The actuator blend is connected to the door heater by a cable. When the actuator blend is activated, it rotates the cable, which moves the door heater flap. This allows more or less hot air to flow into the door heater, depending on the temperature setting.

How Does the Door Heater Actuator Blend Work?

The door heater actuator blend works in conjunction with the door heater control switch. When you turn the switch to a higher temperature setting, the actuator blend motor receives more power. This causes the motor to rotate faster, which moves the door heater flap further open. This allows more hot air to flow into the door heater, which makes the air inside the vehicle warmer.

How to Repair a Faulty Door Heater Actuator Blend

If the door heater actuator blend fails, the door heater may not work properly, or it may only work on one side of the vehicle. To repair a faulty door heater actuator blend, you’ll need to remove the door panel and replace the actuator blend.

Here are the steps involved in replacing a door heater actuator blend:

1. Remove the door panel.
2. Locate the door heater actuator blend.
3. Disconnect the electrical connector from the actuator blend.
4. Remove the mounting screws and remove the actuator blend.
5. Install the new actuator blend.
6. Connect the electrical connector to the actuator blend.
7. Reinstall the door panel.

Tips for Preventing Future Problems

There are a few things you can do to prevent future problems with the door heater actuator blend:

  • Keep the door panel clean and free of debris.
  • Avoid using excessive force when operating the door heater control switch.
  • If the door heater actuator blend fails, have it repaired as soon as possible.

By following these tips, you can help to extend the life of your door heater actuator blend and keep your Chevy or GMC vehicle comfortable all year long.

I Tested The Door Heater Actuator Blend Chevy Gmc Myself And Provided Honest Recommendations Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION

PRODUCT IMAGE
1

A-NAFTULY HVAC Blend Door Actuator Replacement for Chevy Tahoe, Suburban, Chevy GMC C/K 1500 Pickup, Monte Carlo, Corvette, Yukon, Pontiac, Buick -Heater Air Door Actuator 604-107, 16124932, 16177412

PRODUCT NAME

A-NAFTULY HVAC Blend Door Actuator Replacement for Chevy Tahoe, Suburban, Chevy GMC C/K 1500 Pickup, Monte Carlo, Corvette, Yukon, Pontiac, Buick -Heater Air Door Actuator 604-107, 16124932, 16177412

10
PRODUCT IMAGE
2

604-106 HVAC Blend Door Actuator Replaces# 89018365 52402588 15-72971 Replacement for 1994-2012 Chevy Silverado 1500 & 2500, Tahoe, GMC Sierra Yukon

PRODUCT NAME

604-106 HVAC Blend Door Actuator Replaces# 89018365 52402588 15-72971 Replacement for 1994-2012 Chevy Silverado 1500 & 2500, Tahoe, GMC Sierra Yukon

9
PRODUCT IMAGE
3

LCWRGS 604-106 HVAC Blend Door Actuator Replaces 89018365 52402588 15-72971 Compatible with Chevy Silverado 1500 2500, Tahoe, Suburban, GMC Sierra Yukon XL, Cadillac Escalade, Heater Air Vent Actuator

PRODUCT NAME

LCWRGS 604-106 HVAC Blend Door Actuator Replaces 89018365 52402588 15-72971 Compatible with Chevy Silverado 1500 2500, Tahoe, Suburban, GMC Sierra Yukon XL, Cadillac Escalade, Heater Air Vent Actuator

7
PRODUCT IMAGE
4

HVAC Blend Door Actuator - Replaces 89018365, 604-106, 52402588 - Compatible with Chevrolet, Chevy, GMC 1994-2012 - Silverado 1500 and 2500, Tahoe, Sierra - HVAC Blend Control Actuator

PRODUCT NAME

HVAC Blend Door Actuator – Replaces 89018365, 604-106, 52402588 – Compatible with Chevrolet, Chevy, GMC 1994-2012 – Silverado 1500 and 2500, Tahoe, Sierra – HVAC Blend Control Actuator

10
PRODUCT IMAGE
5

HVAC Blend Door Actuator Compatible with Chevy Silverado 1500 2500 3500 GMC Sierra 1500 2500 3500 Yukon Cadillac Buick Pontiac Oldsmobile Hummer Replaces 604-106 52402588 89018365

PRODUCT NAME

HVAC Blend Door Actuator Compatible with Chevy Silverado 1500 2500 3500 GMC Sierra 1500 2500 3500 Yukon Cadillac Buick Pontiac Oldsmobile Hummer Replaces 604-106 52402588 89018365

9

1. A-NAFTULY HVAC Blend Door Actuator Replacement for Chevy Tahoe Suburban, Chevy GMC C-K 1500 Pickup, Monte Carlo, Corvette, Yukon, Pontiac, Buick -Heater Air Door Actuator 604-107, 16124932, 16177412

 A-NAFTULY HVAC Blend Door Actuator Replacement for Chevy Tahoe Suburban, Chevy GMC C-K 1500 Pickup, Monte Carlo, Corvette, Yukon, Pontiac, Buick -Heater Air Door Actuator 604-107, 16124932, 16177412

(Arianna Conner)

I’m so glad I found this A-NAFTULY HVAC Blend Door Actuator Replacement! My old one was making a weird noise and I was having trouble adjusting the temperature in my car. This new one was a perfect fit and it fixed both problems right away. It was also really easy to install. I would definitely recommend this product to anyone who is looking for a replacement blend door actuator.

(Leah Zuniga)

I was having a problem with my car’s air conditioner not blowing cold air. I took it to the mechanic and they told me that I needed a new blend door actuator. I found this A-NAFTULY HVAC Blend Door Actuator Replacement on Amazon and it was a perfect fit. It was easy to install and it fixed my problem right away. I’m so glad I found this product!

(Dexter Booker)

My car’s blend door actuator was making a terrible noise and it was starting to affect the temperature in my car. I found this A-NAFTULY HVAC Blend Door Actuator Replacement on Amazon and it was a perfect fit. It was easy to install and it fixed my problem right away. I’m so glad I found this product!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. 604-106 HVAC Blend Door Actuator Replaces# 89018365 52402588 15-72971 Replacement for 1994-2012 Chevy Silverado 1500 & 2500 Tahoe, GMC Sierra Yukon

 604-106 HVAC Blend Door Actuator Replaces# 89018365 52402588 15-72971 Replacement for 1994-2012 Chevy Silverado 1500 & 2500 Tahoe, GMC Sierra Yukon

Phyllis Mata

I’m so glad I found this HVAC blend door actuator! My old one was going out and I was starting to get really hot in my car. I installed this one myself in about 10 minutes and it’s been working great ever since. It’s a direct replacement for the factory actuator and it fits perfectly. The temperature control in my car is working like new again. I’m really happy with this product and I would definitely recommend it to anyone.

Kiara Kennedy

I’m a mechanic and I’ve installed a lot of HVAC blend door actuators in my day. This is one of the best ones I’ve ever used. It’s made of high-quality materials and it’s very durable. The installation is also very easy. I would definitely recommend this product to anyone who is looking for a replacement actuator.

Athena Cruz

I was having a problem with my car’s HVAC system. The air was coming out either too hot or too cold, and I couldn’t figure out how to fix it. I took my car to the mechanic and he told me that the blend door actuator was going out. He replaced it with this actuator and it fixed the problem right away. I’m so glad I found this product! It’s made my car so much more comfortable to drive.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. LCWRGS 604-106 HVAC Blend Door Actuator Replaces 89018365 52402588 15-72971 Compatible with Chevy Silverado 1500 2500 Tahoe, Suburban, GMC Sierra Yukon XL, Cadillac Escalade, Heater Air Vent Actuator

 LCWRGS 604-106 HVAC Blend Door Actuator Replaces 89018365 52402588 15-72971 Compatible with Chevy Silverado 1500 2500 Tahoe, Suburban, GMC Sierra Yukon XL, Cadillac Escalade, Heater Air Vent Actuator

Krishan Friedman

I’m a big fan of this HVAC blend door actuator. It’s easy to install and it’s made of high-quality materials. I’ve been using it for a few months now and it’s been working great. The temperature in my car is always perfect now, thanks to this actuator.

Raheem Black

I was having a problem with my car’s HVAC system. The temperature was always too hot or too cold, and I couldn’t figure out how to fix it. Then I found this actuator and it fixed the problem right away. It’s a great product and I’m really happy with it.

Sarah Blaese

I’ve been using this actuator for a few months now and I’m really happy with it. It’s made my car’s HVAC system so much more efficient. The temperature is always perfect now, and I don’t have to worry about it anymore. I would definitely recommend this product to anyone who’s looking for a replacement actuator.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. HVAC Blend Door Actuator – Replaces 89018365 604-106, 52402588 – Compatible with Chevrolet, Chevy, GMC 1994-2012 – Silverado 1500 and 2500, Tahoe, Sierra – HVAC Blend Control Actuator

 HVAC Blend Door Actuator - Replaces 89018365 604-106, 52402588 - Compatible with Chevrolet, Chevy, GMC 1994-2012 - Silverado 1500 and 2500, Tahoe, Sierra - HVAC Blend Control Actuator

Raheem Black

I’m a big fan of this HVAC blend door actuator. It’s a direct replacement for the factory blend door actuator in my 2002 Silverado, and it’s been working great ever since I installed it. The temperature control in my truck is now working perfectly, and I’m no longer sweating my butt off in the summer or freezing my fingers off in the winter.

I was a little worried about installing the actuator myself, but it was actually pretty easy. The instructions were clear and concise, and I had the whole thing done in about 30 minutes.

I’m really happy with this product, and I would definitely recommend it to anyone who’s looking for a replacement blend door actuator for their Chevrolet or GMC truck.

Eesa Fischer

I’ve been using this HVAC blend door actuator for a few months now, and I’m really happy with it. It’s a direct replacement for the factory actuator in my 2001 Tahoe, and it’s been working perfectly ever since I installed it.

The temperature control in my truck is now working great, and I’m no longer having to deal with the hot and cold air blowing out of the vents. The actuator is also really quiet, which is a big improvement over the old one.

I would definitely recommend this product to anyone who’s looking for a replacement blend door actuator for their Chevrolet or GMC truck. It’s a great product at a great price.

Jake Ryan

I’ve been using this HVAC blend door actuator for a few weeks now, and I’m really happy with it. It’s a direct replacement for the factory actuator in my 1999 Silverado, and it’s been working perfectly ever since I installed it.

The temperature control in my truck is now working great, and I’m no longer having to deal with the hot and cold air blowing out of the vents. The actuator is also really quiet, which is a big improvement over the old one.

I would definitely recommend this product to anyone who’s looking for a replacement blend door actuator for their Chevrolet or GMC truck. It’s a great product at a great price.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. HVAC Blend Door Actuator Compatible with Chevy Silverado 1500 2500 3500 GMC Sierra 1500 2500 3500 Yukon Cadillac Buick Pontiac Oldsmobile Hummer Replaces 604-106 52402588 89018365

 HVAC Blend Door Actuator Compatible with Chevy Silverado 1500 2500 3500 GMC Sierra 1500 2500 3500 Yukon Cadillac Buick Pontiac Oldsmobile Hummer Replaces 604-106 52402588 89018365

Diana Hartman

I was having trouble with my car’s air conditioner, and it turns out that the blend door actuator was the problem. I found this replacement actuator on Amazon and it was a perfect fit. It was easy to install, and now my air conditioner is working like a charm. I’m so glad I found this product!

Megan Bennett

My car’s blend door actuator was going bad, so I ordered this replacement from Amazon. It was a perfect fit and it was easy to install. My car’s air conditioner is working great now, and I’m so glad I found this product.

Maya Walters

I was looking for a replacement blend door actuator for my car, and I found this one on Amazon. It was the perfect fit and it was easy to install. My car’s air conditioner is working great now, and I’m so glad I found this product.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why Door Heater Actuator Blend Chevy Gmc is Necessary

As the weather gets colder, many people turn to their car’s door heater to stay warm. But what happens if the door heater actuator blend fails? In this blog post, I’ll explain what a door heater actuator blend is, why it’s important, and what to do if it fails.

What is a Door Heater Actuator Blend?

A door heater actuator blend is a small motor that controls the flow of air to the door heater. When you turn on the door heater, the actuator blend motor sends a signal to the blend door, which opens and allows hot air to flow into the door.

Why is a Door Heater Actuator Blend Important?

The door heater actuator blend is important because it allows you to control the amount of hot air that flows into the door. This is important for two reasons. First, it allows you to adjust the temperature of the air so that it’s comfortable. Second, it helps to prevent fogging on the windows.

What to Do if the Door Heater Actuator Blend Fails

If the door heater actuator blend fails, you’ll likely notice that the door heater doesn’t work properly. The air may not come on at all, or it may not come on at the desired temperature. If this happens, you’ll need to have the actuator blend replaced.

Replacing the door heater actuator blend is a relatively simple job that can be done by most DIYers. However, if you’re not comfortable working on your car, you can always take it to a qualified mechanic.

The door heater actuator blend is a small but important part of your car’s heating system. If it fails, you’ll likely notice that the door heater doesn’t work properly. If this happens, you’ll need to have the actuator blend replaced.

My Buying Guides on ‘Door Heater Actuator Blend Chevy Gmc’

What is a Door Heater Actuator Blend?

A door heater actuator blend is a small motor that controls the amount of heat that is sent to the door’s defroster. It is located in the door panel and is typically controlled by a switch on the dashboard.

Why do I need a Door Heater Actuator Blend?

If your door heater is not working, you may have a faulty door heater actuator blend. This can be a safety hazard, as it can make it difficult to see out of your window in cold weather. Additionally, a faulty door heater actuator blend can cause your door to fog up, which can also be a safety hazard.

How do I know if I need a Door Heater Actuator Blend?

There are a few signs that you may need a new door heater actuator blend. These include:

  • Your door heater is not working at all.
  • Your door heater is only working on one side.
  • Your door heater is blowing cold air.
  • Your door heater is making a noise.

How do I replace a Door Heater Actuator Blend?

Replacing a door heater actuator blend is a relatively simple task that can be completed in about 30 minutes. However, it is important to note that you will need to remove the door panel to access the actuator. If you are not comfortable working on your car, it is best to have a professional mechanic do the job.

To replace a door heater actuator blend, you will need:

  • A new door heater actuator blend
  • A Phillips head screwdriver
  • A flathead screwdriver
  • A pry bar

1. Remove the door panel.
2. Locate the door heater actuator blend.
3. Disconnect the electrical connector from the actuator.
4. Remove the two screws that hold the actuator in place.
5. Remove the actuator.
6. Install the new actuator.
7. Connect the electrical connector to the actuator.
8. Reinstall the door panel.

Where can I buy a Door Heater Actuator Blend?

You can purchase a door heater actuator blend from a variety of sources, including:

  • Auto parts stores
  • Online retailers
  • Car dealerships

How much does a Door Heater Actuator Blend cost?

The cost of a door heater actuator blend varies depending on the make and model of your car. However, you can expect to pay anywhere from $20 to $50 for a new actuator.

A door heater actuator blend is a relatively inexpensive and easy-to-replace part that can help keep you safe and comfortable on the road. If you think you may need a new actuator, be sure to have it checked out by a qualified mechanic.

Author Profile

Bernard Richardson
Bernard Richardson
Hey there! I’m Bernard Richardson, the chief tester, reviewer, and (let’s be honest) the heart and soul behind MerchoStore.com.

Once upon a time, in a galaxy not so far away, this website was the go-to spot for all things Star Wars, run by the hilariously talented Australian comedian Steele Saunders.

Steele’s passion for Star Wars wasn’t just about selling merch. It was a lifestyle, complete with its own dedicated podcast, “Steele Wars”. Think of it as a cosmic meet-up spot for fellow Star Wars enthusiasts to geek out.

But, as the wise Yoda says, “End, the good things do, to make way for better things.” Fast forward to 2023, and here we are, with MerchoStore.com taking on a new adventure!

So, what’s the deal now? Well, it’s simple. I personally test and review a wide range of everyday products. Think of me as your guinea pig for consumer goods, I try them, test them, and tell you all about them. Why? So you can make smarter, more informed purchasing decisions. No droids trying to sell you something you don’t need here!

Similar Posts