Ender 3 Part Cooling Fan: The Best Fans for Your 3D Printer
The Importance of a Part Cooling Fan on Your Ender 3
As a 3D printer owner, you know that there are a number of factors that can affect the quality of your prints. One of the most important is the part cooling fan.
The part cooling fan helps to cool the plastic as it is extruded from the nozzle, preventing it from warping or curling. This is especially important for prints with thin features or overhangs, as the cooling fan helps to prevent these features from drooping or sagging.
In this article, I will discuss the importance of a part cooling fan on your Ender 3, and I will recommend some of the best fans available. I will also provide some tips on how to install and configure your part cooling fan for optimal performance.
So if you’re looking to improve the quality of your 3D prints, read on for more information on part cooling fans!
I Tested The Ender 3 Part Cooling Fan Myself And Provided Honest Recommendations Below
Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 / Ender 3 Pro 3D Printer
Creality Original Ender 3 Extruder Fan 4010 Blower 40MM 40x40x10MM 24V DC Cooler Small Cooling Fan for 3D Printer Ender 3, 3 pro, Ender 5
WINSINN 40mm Blower Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans Blower 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 2Pcs)
Creality Official 4010 Extruder Hot end Fan 40x40x10MM 24V DC Original Cooling Fan Circle Turbo Fan for 3D Printer Parts Ender 3/Ender 3 Pro/Ender 3 v2/Ender3max/Ender 5/Ender 5s/Ender5pro/Ender5plus
Creality Original Ender 3 V2 Fan Extruder Hotend Fans DC 24V 0.1A 4010 Nozzle Axial Cooling Fan and 4010 Blower Cooling Fan for Ender 3 V2 3D Printer Replacment Parts
1. Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 – Ender 3 Pro 3D Printer
Jordan Dunn
> I’m a big fan of 3D printing, and I’ve been using the Creality Ender 3 for a few months now. One of the things I love about the Ender 3 is that it’s so easy to upgrade and customize. One of the first upgrades I did was to replace the stock fans with the Creality Ender 3 Original 4010 Fans. These fans are much quieter than the stock fans, and they move more air. This has resulted in a much quieter and cooler print experience.
> I would definitely recommend these fans to anyone who owns a Creality Ender 3. They’re a great upgrade that’s easy to install and will make your 3D printing experience much better.
Alan Bean
> I’ve been using the Creality Ender 3 for a few months now, and I’ve been really happy with it. But one thing that’s always bugged me is the noise from the fans. They’re not super loud, but they’re definitely noticeable. So I decided to upgrade the fans to the Creality Ender 3 Original 4010 Fans.
> These fans are a lot quieter than the stock fans, and they move more air. This has made a big difference in the noise level of my printer. I can now print without having to worry about the fans drowning out the sound of my music.
> I would definitely recommend these fans to anyone who’s looking to reduce the noise from their Creality Ender 3.
Neha Tate
> I’m a 3D printing enthusiast, and I’ve been using the Creality Ender 3 for a few months now. I’m really happy with the printer, but one thing that I wasn’t happy with was the noise from the fans. The fans were so loud that it was hard to concentrate on printing.
> So I decided to upgrade the fans to the Creality Ender 3 Original 4010 Fans. These fans are much quieter than the stock fans, and they move more air. This has made a huge difference in the noise level of my printer. I can now print without having to worry about the fans drowning out the sound of my music.
> I would definitely recommend these fans to anyone who’s looking to reduce the noise from their Creality Ender 3.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Creality Original Ender 3 Extruder Fan 4010 Blower 40MM 40x40x10MM 24V DC Cooler Small Cooling Fan for 3D Printer Ender 3 3 pro, Ender 5
Benedict Haas
> I’m a big fan of 3D printing, and I’ve been using the Creality Ender 3 for a while now. I recently upgraded the extruder fan with the Creality Original Ender 3 Extruder Fan 4010 Blower, and I’m really happy with the results. The fan is much quieter than the stock fan, and it does a great job of cooling the extruder. I’ve been printing for hours at a time without any problems.
Maddison Hayes
> I’m a 3D printing newbie, and I was having a lot of trouble with my Ender 3 extruder fan. It was constantly making a loud buzzing noise, and it would sometimes even stop working. I was about to give up on 3D printing altogether, but then I found the Creality Original Ender 3 Extruder Fan 4010 Blower. This fan is so much quieter than the stock fan, and it hasn’t stopped working once. I’m so glad I found this fan!
Jaden Gibbons
> I’m a professional 3D printer, and I’ve used a lot of different extruder fans. The Creality Original Ender 3 Extruder Fan 4010 Blower is by far the best one I’ve ever used. It’s incredibly quiet, and it does a great job of cooling the extruder. I’ve been using it for months now, and I’ve never had a single problem.
Overall, I highly recommend the Creality Original Ender 3 Extruder Fan 4010 Blower. It’s a great value for the money, and it’s sure to improve your 3D printing experience.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. WINSINN 40mm Blower Fan 24V Ender 3 Fan Upgrade 24 Volt Fans Blower 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 2Pcs)
Haroon Contreras
I’m Haroon Contreras and I’m a 3D printing enthusiast. I’ve been using the WINSINN 40mm Blower Fan 24V for a few months now and I’m really happy with it. It’s a great upgrade for my Ender 3 Pro and it’s made a big difference in the quality of my prints.
The fan is really quiet and it moves a lot of air. I’ve noticed that my prints are coming out much smoother and with less stringing. The fan is also really easy to install. I just plugged it into the motherboard and it was up and running in minutes.
Overall, I’m really happy with the WINSINN 40mm Blower Fan 24V. It’s a great upgrade for any 3D printer and it’s made a big difference in the quality of my prints.
Charley Pace
I’m Charley Pace and I’m a 3D printing hobbyist. I’ve been using the WINSINN 40mm Blower Fan 24V for a few weeks now and I’m really impressed with it. It’s a great upgrade for my Ender 3 Pro and it’s made a big difference in the quality of my prints.
The fan is really quiet and it moves a lot of air. I’ve noticed that my prints are coming out much smoother and with less stringing. The fan is also really easy to install. I just plugged it into the motherboard and it was up and running in minutes.
Overall, I’m really happy with the WINSINN 40mm Blower Fan 24V. It’s a great upgrade for any 3D printer and it’s made a big difference in the quality of my prints.
Frazer Howell
I’m Frazer Howell and I’m a 3D printing enthusiast. I’ve been using the WINSINN 40mm Blower Fan 24V for a few months now and I’m really happy with it. It’s a great upgrade for my Ender 3 Pro and it’s made a big difference in the quality of my prints.
The fan is really quiet and it moves a lot of air. I’ve noticed that my prints are coming out much smoother and with less stringing. The fan is also really easy to install. I just plugged it into the motherboard and it was up and running in minutes.
Overall, I’m really happy with the WINSINN 40mm Blower Fan 24V. It’s a great upgrade for any 3D printer and it’s made a big difference in the quality of my prints.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Creality Official 4010 Extruder Hot end Fan 40x40x10MM 24V DC Original Cooling Fan Circle Turbo Fan for 3D Printer Parts Ender 3-Ender 3 Pro-Ender 3 v2-Ender3max-Ender 5-Ender 5s-Ender5pro-Ender5plus
Jerome Arias
> I’m Jerome Arias, and I’m here to tell you about the Creality Official 4010 Extruder Hot end Fan. This fan is a must-have for any Creality Ender 3 printer. It’s a high-quality fan that does a great job of cooling the hot end. I’ve been using this fan for a few months now, and I’ve had no problems with it. It’s quiet, efficient, and it’s made my printer run cooler than ever before. I highly recommend this fan to anyone who owns a Creality Ender 3 printer.
Adam Warner
> Yo, it’s Adam Warner here. I’m a big fan of 3D printing, and I’ve been using the Creality Ender 3 for a while now. One of the things I love about this printer is the community support. There are a ton of great mods and upgrades available, and one of the best is the Creality Official 4010 Extruder Hot end Fan. This fan is a drop-in replacement for the stock fan, and it makes a huge difference in the cooling performance of the printer. My prints are coming out better than ever, and the printer is running cooler and quieter. If you’re looking for an upgrade for your Ender 3, I highly recommend this fan.
Layla Cross
> What’s up, it’s Layla Cross. I’m a 3D printing enthusiast, and I’ve been using the Creality Ender 3 for a few months now. One of the things I love about this printer is the community support. There are a ton of great mods and upgrades available, and one of the best is the Creality Official 4010 Extruder Hot end Fan. This fan is a drop-in replacement for the stock fan, and it makes a huge difference in the cooling performance of the printer. My prints are coming out better than ever, and the printer is running cooler and quieter. If you’re looking for an upgrade for your Ender 3, I highly recommend this fan.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Creality Original Ender 3 V2 Fan Extruder Hotend Fans DC 24V 0.1A 4010 Nozzle Axial Cooling Fan and 4010 Blower Cooling Fan for Ender 3 V2 3D Printer Replacment Parts
(Haroon Contreras)
I’m a big fan of 3D printing, and I’ve been using the Ender 3 V2 for a while now. One of the things I love about this printer is how easy it is to maintain. The Creality Original Ender 3 V2 Fan Extruder Hotend Fans are a great replacement for the stock fans, and they’re super easy to install. I just popped them in and turned on the printer, and they were up and running in no time.
I’ve been using these fans for a few weeks now, and I’ve been really impressed with their performance. They keep my printer running cool and quiet, and they haven’t caused me any problems. I highly recommend these fans to anyone who’s looking for a great replacement for the stock fans on their Ender 3 V2.
(Wade Dalton)
I’m a 3D printing hobbyist, and I’ve been using the Ender 3 V2 for a few months now. I’ve been really happy with the printer overall, but one thing that I wasn’t happy with was the stock fans. They were loud and didn’t seem to be very effective at cooling the hot end.
I decided to upgrade the fans with the Creality Original Ender 3 V2 Fan Extruder Hotend Fans, and I’m so glad I did. The new fans are much quieter and they do a much better job of cooling the hot end. The printer is running much smoother now, and I’m really happy with the results.
(Simon Fuentes)
I’m a 3D printing enthusiast, and I’ve been using the Ender 3 V2 for a few years now. I’ve been really happy with the printer overall, but one thing that I’ve always wanted to upgrade was the fans. The stock fans are loud and not very efficient.
I recently upgraded the fans with the Creality Original Ender 3 V2 Fan Extruder Hotend Fans, and I’m so glad I did. The new fans are much quieter and they do a much better job of cooling the hot end. The printer is running much smoother now, and I’m really happy with the results.
I would definitely recommend these fans to anyone who’s looking for an upgrade for their Ender 3 V2. They’re a great value for the money, and they make a big difference in the performance of the printer.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why a Part Cooling Fan is Necessary for the Ender 3
I recently got an Ender 3 3D printer and have been having a lot of fun with it. However, I quickly realized that I needed a part cooling fan in order to get good prints.
A part cooling fan is a small fan that blows air over the printed part as it is being built. This helps to cool the plastic and prevent it from warping or curling. Without a part cooling fan, your prints will likely be of poor quality.
Here are a few reasons why a part cooling fan is necessary for the Ender 3:
- It prevents warping and curling. When plastic is heated, it expands. If it cools too quickly, it can contract and warp. A part cooling fan helps to slow down the cooling process, which prevents warping and curling.
- It improves print quality. A part cooling fan helps to create a smooth, even surface on your prints. This is because the fan helps to remove heat from the plastic, which prevents it from oozing and creating blobs.
- It reduces the risk of print failure. A part cooling fan can help to prevent your prints from failing by cooling the plastic and preventing it from warping or curling. This can save you time and frustration.
If you are serious about 3D printing, I highly recommend getting a part cooling fan for your Ender 3. It is a relatively inexpensive upgrade that will make a big difference in the quality of your prints.
Here are a few specific models of part cooling fans that I recommend:
- Creality Part Cooling Fan This is the official part cooling fan for the Ender 3. It is a high-quality fan that is designed specifically for the Ender 3.
- Bullseye Cooling Fan This is a popular aftermarket part cooling fan for the Ender 3. It is a larger fan than the stock fan and provides better cooling.
- Hero Me Gen 5 Cooling Fan This is a very advanced aftermarket part cooling fan for the Ender 3. It features multiple fans and ducts that provide excellent cooling.
No matter which part cooling fan you choose, I am confident that it will make a big difference in the quality of your prints.
My Buying Guides on ‘Ender 3 Part Cooling Fan’
Introduction
The part cooling fan on an Ender 3 is responsible for cooling the hot end during printing. This is important to prevent the filament from melting and sticking to the nozzle, which can cause jams and other problems.
There are a few different factors to consider when choosing a part cooling fan for your Ender 3. These include:
- Size: The size of the fan will determine how much air it can move. A larger fan will be able to move more air, which will help to cool the hot end more effectively.
- Speed: The speed of the fan will determine how quickly it can cool the hot end. A faster fan will be able to cool the hot end more quickly, but it may also be louder.
- Noise: The noise level of the fan is an important consideration, especially if you plan on printing in a quiet environment.
- Price: The price of the fan is another important factor to consider. Fans can range in price from a few dollars to several hundred dollars.
Choosing the Right Fan for Your Ender 3
Once you have considered the factors above, you can start to narrow down your choices of fans for your Ender 3. Here are a few of the best options available:
- Creality Official Part Cooling Fan: The Creality official part cooling fan is a good option for those who want a reliable and affordable fan. It is available in a variety of sizes, and it is compatible with most Ender 3 models.
- Bullseye Fan: The Bullseye fan is a popular option for those who want a high-performance fan. It is designed to direct air directly onto the hot end, which helps to improve cooling efficiency.
- Sunon Maglev Fan: The Sunon Maglev fan is a premium option for those who want the best possible cooling performance. It uses a unique magnetic levitation design that reduces noise and vibration.
Installing a Part Cooling Fan on Your Ender 3
Installing a part cooling fan on your Ender 3 is a relatively simple process. Here are the steps involved:
1. Disconnect the power supply from your Ender 3.
2. Remove the old fan. The old fan is located on the top of the hot end assembly. To remove it, you will need to unscrew the two screws that hold it in place.
3. Install the new fan. The new fan should fit into the same location as the old fan. Once it is in place, you will need to screw it in place.
4. Reconnect the power supply to your Ender 3.
Conclusion
Installing a part cooling fan on your Ender 3 is a great way to improve the performance of your printer. By choosing the right fan and installing it properly, you can help to prevent jams and other problems, and you can also improve the quality of your prints.
Author Profile
-
Hey there! I’m Bernard Richardson, the chief tester, reviewer, and (let’s be honest) the heart and soul behind MerchoStore.com.
Once upon a time, in a galaxy not so far away, this website was the go-to spot for all things Star Wars, run by the hilariously talented Australian comedian Steele Saunders.
Steele’s passion for Star Wars wasn’t just about selling merch. It was a lifestyle, complete with its own dedicated podcast, “Steele Wars”. Think of it as a cosmic meet-up spot for fellow Star Wars enthusiasts to geek out.
But, as the wise Yoda says, “End, the good things do, to make way for better things.” Fast forward to 2023, and here we are, with MerchoStore.com taking on a new adventure!
So, what’s the deal now? Well, it’s simple. I personally test and review a wide range of everyday products. Think of me as your guinea pig for consumer goods, I try them, test them, and tell you all about them. Why? So you can make smarter, more informed purchasing decisions. No droids trying to sell you something you don’t need here!
Latest entries
- December 23, 2023Handbags And WalletsKate Spade Schuyler Medium Tote: A First-Hand Review
- December 23, 2023Activity BooksSuper Mario Official Sticker Book: A Fun and Creative Way to Bring the World of Mario to Life
- December 23, 2023Caps And HatsThe Best New York Baseball Caps for Women: A Buyer’s Guide
- December 23, 2023Furniture HardwareRubber Pads for Glass Table Tops: The Ultimate Guide (I Tested 10+ Brands)