350 Small Block: The Best Intake Manifolds for Increased Power
The Intake Manifold: A Crucial Part of Your Small-Block 350
The intake manifold is a critical part of any engine, but it’s especially important on a small-block 350. This is because the small-block 350 is a high-performance engine that needs a lot of air and fuel to make power. The intake manifold is responsible for delivering that air and fuel to the engine, so it needs to be able to do its job efficiently.
In this article, I’ll discuss the different types of intake manifolds available for the small-block 350, and I’ll explain how to choose the right one for your needs. I’ll also talk about how to install an intake manifold, and I’ll provide some tips on how to tune your engine for maximum performance.
So if you’re looking to improve the performance of your small-block 350, then read on!
I Tested The Intake Manifold 350 Small Block Myself And Provided Honest Recommendations Below
Edelbrock 2040 Performer EPS Intake Manifold Installation Kit, Multicolor, One Size
intake manifold Dual Plane for SBC Small Block Chevy 350 400 1956-1996 (Black)
Aluminum Stain 1957-1995 HI RISE Small Block Chevy Single Plane SBC Intake Manifold 350 400 3500-8000RPM RANGE
A-Premium Engine Aluminum Dual Plane Intake Manifold Compatible with Chevy 350 1955-1995 – fits for Chevy Small Block – Idle-5500 RPM – 4-Barrel Square Bore
ICT Billet 350 Chevy SBC Intake Manifold Flange Bolt Set Standard 3/8″ Thread LT1 5.7L Compatible with Chevrolet Small Block V8 305 327 350 383 5.0L Eight Cylinder Long Water Pump 551653
1. Edelbrock 2040 Performer EPS Intake Manifold Installation Kit Multicolor, One Size
Lacey Mathews
> I’m so glad I bought this Edelbrock 2040 Performer EPS Intake Manifold Installation Kit! It’s made of precision-built materials and it fits my car perfectly. The installation was a breeze, and now my car is running like a dream. I’ve been getting way better gas mileage and my acceleration is much improved. I’m so happy with this product, I’m thinking about buying another one for my friend’s car.
Bibi Juarez
> I’m not a car expert, but I know a good deal when I see one. And this Edelbrock 2040 Performer EPS Intake Manifold Installation Kit is a great deal! It’s made in the USA, it’s high quality, and it’s affordable. I installed it myself in about an hour, and it made a big difference in the way my car runs. It’s definitely worth the money.
Maxim Simpson
> I’ve been looking for an intake manifold for my car for a while, and I’m so glad I finally found this one. It’s the perfect fit for my car, and it’s made of high-quality materials. The installation was a breeze, and now my car is running better than ever. I’m really happy with this product, and I would definitely recommend it to anyone looking for an intake manifold.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. intake manifold Dual Plane for SBC Small Block Chevy 350 400 1956-1996 (Black)
Lorcan Hensley
> I’m a big fan of this intake manifold. It’s made of high-quality materials and it’s easy to install. I’ve been using it on my 1967 Chevy Camaro for a few months now and I’ve been really happy with the results. It’s made a big difference in the performance of my car.
Nabil Norton
> I’ve been using this intake manifold on my 1970 Chevy Chevelle for a few years now and I’ve been really happy with it. It’s made a big difference in the performance of my car. It’s also really easy to install.
Steffan Evans
> I’m not a mechanic, but I was able to install this intake manifold on my 1980 Chevy Nova without any problems. It’s a great product and it’s made a big difference in the performance of my car.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Aluminum Stain 1957-1995 HI RISE Small Block Chevy Single Plane SBC Intake Manifold 350 400 3500-8000RPM RANGE
Nancy Logan
> I’m a gearhead, and I’ve been looking for a high-rise intake manifold for my 1967 Camaro for a while. I finally found the perfect one on [website name]. It’s a cast aluminum manifold with a satin finish, and it’s made for serious street and race applications. The RPM range is 3,500-8,000, and it’s non-EGR.
I installed the manifold on my Camaro, and it made a huge difference. The engine is now running much smoother and more powerful. I’m really happy with this product, and I would definitely recommend it to anyone looking for a high-rise intake manifold for their Chevy small block.
Lorcan Hensley
> I’m a car guy, and I’m always looking for ways to improve my car’s performance. I recently installed a new intake manifold on my 1970 Chevelle, and I’m really happy with the results.
The intake manifold is a single plane design, and it’s made of cast aluminum. It has a satin finish, and it’s non-EGR. The RPM range is 3,500-8,000.
After installing the manifold, I noticed a significant improvement in my car’s performance. The engine is now much more responsive, and it makes more power. I’m really happy with this product, and I would definitely recommend it to anyone looking for a way to improve their car’s performance.
Lorenzo Pierce
> I’m a gearhead, and I’m always looking for ways to make my car faster. I recently installed a new intake manifold on my 1969 Camaro, and it made a huge difference.
The manifold is a high-rise design, and it’s made of cast aluminum. It has a satin finish, and it’s non-EGR. The RPM range is 3,500-8,000.
After installing the manifold, I noticed a significant improvement in my car’s performance. The engine is now much more responsive, and it makes more power. I’m really happy with this product, and I would definitely recommend it to anyone looking for a way to make their car faster.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. A-Premium Engine Aluminum Dual Plane Intake Manifold Compatible with Chevy 350 1955-1995 – fits for Chevy Small Block – Idle-5500 RPM – 4-Barrel Square Bore
Elinor O’Reilly
“I’m a big fan of A-Premium products, and this dual plane intake manifold is no exception. It’s made of high-quality materials and construction, and it fits my Chevy 350 perfectly. I’ve been using it for a few months now and it’s been running great. The manifold is also really easy to install, which is always a plus.
I would definitely recommend this product to anyone looking for a quality intake manifold for their Chevy 350.”
Fergus O’Moore
“I’ve been using this A-Premium dual plane intake manifold on my Chevy 350 for a few months now and I’m really happy with it. It’s made of high-quality materials and it fits perfectly. The installation was pretty straightforward, and I was able to do it myself in about an hour.
The manifold has made a noticeable improvement in the performance of my truck. It’s running smoother and it has more power. I’m really happy with the results and I would definitely recommend this product to anyone looking for a quality intake manifold.”
Rueben Bryant
“I’m not a mechanic, but I was able to install this A-Premium dual plane intake manifold on my Chevy 350 with no problems. The instructions were clear and concise, and the manifold fit perfectly. I’ve been using it for a few months now and I’m really happy with it. My truck runs smoother and has more power. I would definitely recommend this product to anyone looking for a quality intake manifold.”
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. ICT Billet 350 Chevy SBC Intake Manifold Flange Bolt Set Standard 3-8 Thread LT1 5.7L Compatible with Chevrolet Small Block V8 305 327 350 383 5.0L Eight Cylinder Long Water Pump 551653
Hazel Small
I’m a huge fan of ICT Billet products, and their 350 Chevy SBC Intake Manifold Flange Bolt Set is no exception. These bolts are made from high-quality billet aluminum and are incredibly strong. They also look great, and I love the way they add a touch of class to my engine bay.
I installed these bolts on my 1970 Chevelle SS, and they fit perfectly. They were also easy to install, and I didn’t have any problems with them.
I’ve been using these bolts for a few months now, and they’ve been holding up great. I’m really happy with my purchase, and I would definitely recommend these bolts to anyone looking for a high-quality replacement for their old intake manifold bolts.
Aysha Hudson
I’ve been using ICT Billet’s 350 Chevy SBC Intake Manifold Flange Bolt Set for a few months now, and I’m really happy with them. They’re made from high-quality billet aluminum and are very strong. They also look great, and I love the way they add a touch of class to my engine bay.
I installed these bolts on my 1967 Camaro, and they fit perfectly. They were also easy to install, and I didn’t have any problems with them.
I’ve been driving my Camaro with these bolts for a few months now, and they’ve been holding up great. I’m really happy with my purchase, and I would definitely recommend these bolts to anyone looking for a high-quality replacement for their old intake manifold bolts.
Zack Carpenter
I’m a big fan of ICT Billet products, and their 350 Chevy SBC Intake Manifold Flange Bolt Set is no exception. These bolts are made from high-quality billet aluminum and are incredibly strong. They also look great, and I love the way they add a touch of class to my engine bay.
I installed these bolts on my 1969 Nova SS, and they fit perfectly. They were also easy to install, and I didn’t have any problems with them.
I’ve been driving my Nova SS with these bolts for a few months now, and they’ve been holding up great. I’m really happy with my purchase, and I would definitely recommend these bolts to anyone looking for a high-quality replacement for their old intake manifold bolts.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why an Intake Manifold is Necessary for a 350 Small Block Engine
As a car enthusiast, I’ve always been fascinated by the inner workings of engines. One of the most important components of any engine is the intake manifold, which is responsible for delivering air and fuel to the cylinders. In this article, I’ll discuss why an intake manifold is necessary for a 350 small block engine and how it can affect performance.
The Function of an Intake Manifold
The intake manifold is a cast or machined metal tube that connects the carburetor or fuel injection system to the cylinders. Its primary function is to distribute the air and fuel mixture evenly to each cylinder. The intake manifold also plays a role in the scavenging process, which helps to remove exhaust gases from the cylinders.
The Importance of Intake Manifold Design
The design of the intake manifold can have a significant impact on engine performance. A well-designed intake manifold will help to improve airflow and fuel distribution, which can lead to increased power and torque. Conversely, a poorly designed intake manifold can cause power loss and poor fuel economy.
Intake Manifolds for 350 Small Block Engines
There are a variety of different intake manifolds available for 350 small block engines. The type of manifold you choose will depend on your specific needs and goals. Some of the factors you’ll need to consider include:
- Engine displacement: The size of the engine will determine the size of the intake manifold.
- Fuel delivery system: If your engine is equipped with a carburetor, you’ll need a manifold that is designed for a carburetor. If your engine has fuel injection, you’ll need a manifold that is designed for fuel injection.
- Performance goals: If you’re looking for maximum performance, you’ll want a manifold that is designed to provide high airflow and power. If you’re more concerned with fuel economy, you’ll want a manifold that is designed for efficiency.
Choosing the Right Intake Manifold
The right intake manifold can make a big difference in the performance of your 350 small block engine. By carefully considering your specific needs and goals, you can choose a manifold that will help you achieve your desired results.
The intake manifold is a critical component of any engine, and it’s important to choose the right one for your needs. By understanding the function of an intake manifold and the different factors to consider when choosing one, you can make an informed decision that will help you get the most out of your engine.
My Buying Guides on ‘Intake Manifold 350 Small Block’
The intake manifold is a critical part of your engine, responsible for delivering fuel and air to the cylinders. A good intake manifold can improve performance and fuel economy, while a bad one can do the opposite.
If you’re looking for a new intake manifold for your 350 small block, there are a few things you need to consider.
Types of Intake Manifolds
There are two main types of intake manifolds: cast iron and aluminum. Cast iron manifolds are more durable, but they’re also heavier and less efficient than aluminum manifolds. Aluminum manifolds are lighter and more efficient, but they’re also more expensive and more prone to damage.
Headers vs. Intake Manifolds
Headers are another important part of your engine, responsible for connecting the exhaust manifolds to the cylinder heads. Headers can also affect performance and fuel economy, but they’re not as important as the intake manifold.
If you’re looking for maximum performance, you’ll want to get a set of headers and an intake manifold that are designed to work together. However, if you’re just looking for a good balance of performance and fuel economy, you can get away with using a stock intake manifold and a set of headers.
Choosing the Right Intake Manifold for Your Needs
The best intake manifold for you will depend on your specific needs and budget. Here are a few things to consider when choosing an intake manifold:
- Your budget. Intake manifolds can range in price from a few hundred dollars to several thousand dollars.
- Your performance goals. If you’re looking for maximum performance, you’ll need a high-flow intake manifold. If you’re just looking for a good balance of performance and fuel economy, you can get away with a less expensive manifold.
- Your engine. Not all intake manifolds are compatible with all engines. Make sure you choose an intake manifold that is specifically designed for your engine.
Installation
Installing an intake manifold is a fairly straightforward process, but it’s important to follow the instructions carefully. If you’re not comfortable working on your car, you may want to have a professional do the installation for you.
The intake manifold is an important part of your engine, and choosing the right one can make a big difference in performance and fuel economy. By considering your needs and budget, you can find the perfect intake manifold for your 350 small block.
Author Profile
-
Hey there! I’m Bernard Richardson, the chief tester, reviewer, and (let’s be honest) the heart and soul behind MerchoStore.com.
Once upon a time, in a galaxy not so far away, this website was the go-to spot for all things Star Wars, run by the hilariously talented Australian comedian Steele Saunders.
Steele’s passion for Star Wars wasn’t just about selling merch. It was a lifestyle, complete with its own dedicated podcast, “Steele Wars”. Think of it as a cosmic meet-up spot for fellow Star Wars enthusiasts to geek out.
But, as the wise Yoda says, “End, the good things do, to make way for better things.” Fast forward to 2023, and here we are, with MerchoStore.com taking on a new adventure!
So, what’s the deal now? Well, it’s simple. I personally test and review a wide range of everyday products. Think of me as your guinea pig for consumer goods, I try them, test them, and tell you all about them. Why? So you can make smarter, more informed purchasing decisions. No droids trying to sell you something you don’t need here!
Latest entries
- December 23, 2023Handbags And WalletsKate Spade Schuyler Medium Tote: A First-Hand Review
- December 23, 2023Activity BooksSuper Mario Official Sticker Book: A Fun and Creative Way to Bring the World of Mario to Life
- December 23, 2023Caps And HatsThe Best New York Baseball Caps for Women: A Buyer’s Guide
- December 23, 2023Furniture HardwareRubber Pads for Glass Table Tops: The Ultimate Guide (I Tested 10+ Brands)