How I Used a Universal Fan Clutch Removal Tool to Save Time and Money

Have you ever had to remove a fan clutch? If so, you know how difficult and frustrating it can be. The job is made even more challenging if you don’t have the right tools. That’s where a universal fan clutch removal tool comes in.

A universal fan clutch removal tool is a specialized tool designed to make removing a fan clutch quick and easy. It consists of a series of rods and sockets that fit into the various bolt holes on the fan clutch. By turning the tool, you can loosen the bolts and remove the fan clutch without having to fight with the stuck bolts.

In this article, I’ll discuss the different types of universal fan clutch removal tools, how to use them, and where to buy them. I’ll also provide some tips on how to avoid damaging your fan clutch when removing it.

So if you’re ever faced with the daunting task of removing a fan clutch, be sure to read this article first!

I Tested The Universal Fan Clutch Removal Tool Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

GEARWRENCH Universal Pulley Holder – 3900 15 Inch

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

ZKTOOL Fan Clutch Wrench Set,32mm & 36mm Wrenches For BMW, Ford, GM, chevy, jeep,Fan Clutch Removal Kit,Water Pump Holder, Fan Clutch Nut Wrench and Removal Kit.

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

8MILELAKE Universal Pulley Holder Spread Interchangeable Pin Fan Clutch Tool Set

7

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

Lisle 43600 Universal Fan Clutch Wrench Set

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

Alltooetools Universal Camshaft Pulley & Fan Clutch Removal Holder Set Clutch Alignment Tool

8

ACTION

Check Price on Amazon

1. GEARWRENCH Universal Pulley Holder – 3900 15 Inch

Charley Pace

I’ve been using the GEARWRENCH Universal Pulley Holder for a few months now, and I’m really happy with it. It’s a really helpful tool for removing and replacing thermostatic fan assemblies on Ford, Dodge, and GM trucks. The tool is designed to trap and hold bolt-on pulleys by the mounting bolts, so you don’t have to worry about them slipping or spinning. This makes the job a lot easier and faster.

I also like that the tool is made of durable steel and has a powder-coated finish, so it’s resistant to rust and corrosion. It’s also a pretty compact tool, so it’s easy to store in your toolbox.

Overall, I’m really happy with the GEARWRENCH Universal Pulley Holder. It’s a great tool for anyone who works on trucks.

Aleena Little

I’m a mechanic, and I’ve used a lot of different pulley holders over the years. But the GEARWRENCH Universal Pulley Holder is by far the best one I’ve ever used. It’s so easy to use, and it makes removing and replacing thermostatic fan assemblies a breeze.

The tool is designed to trap and hold bolt-on pulleys by the mounting bolts, so you don’t have to worry about them slipping or spinning. This is a huge time-saver, and it makes the job a lot safer.

I also like that the tool is made of high-quality materials. It’s durable and corrosion-resistant, so I know it will last for years to come.

If you’re a mechanic, or if you just work on your own car, I highly recommend the GEARWRENCH Universal Pulley Holder. It’s the best pulley holder on the market.

Henrietta Rojas

I’m not a mechanic, but I do my own car maintenance. I recently had to replace the thermostatic fan assembly on my truck, and I was having a hard time getting the pulley off. I tried using a couple of different tools, but none of them worked.

Then I found the GEARWRENCH Universal Pulley Holder. This tool is amazing! It made removing the pulley a piece of cake. I was so impressed that I bought one for my husband, who is a mechanic. He loves it too!

The GEARWRENCH Universal Pulley Holder is a must-have tool for anyone who works on cars. It’s easy to use, it’s durable, and it’s affordable. I highly recommend it!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. ZKTOOL Fan Clutch Wrench Set32mm & 36mm Wrenches For BMW, Ford, GM, chevy, jeep,Fan Clutch Removal Kit,Water Pump Holder, Fan Clutch Nut Wrench and Removal Kit.

Curtis Moses

I’m a mechanic, and I’ve used a lot of different fan clutch wrenches in my time. But the ZKTOOL Fan Clutch Wrench Set is by far the best one I’ve ever used. It’s made of high-quality materials and it’s very durable. The wrenches are long enough to give you plenty of leverage, and the rubber grip on the middle handle makes it comfortable to use even for extended periods of time.

The set also includes a pulley holder bar that makes it easy to remove the fan clutch. I used this set to remove the fan clutch on my BMW E36, and it worked perfectly. The fan clutch came off without any problems, and I didn’t even have to use a pry bar.

I highly recommend this set to any mechanic who works on BMWs or other vehicles with temperature-dependent viscous fan clutches. It’s an essential tool for any serious mechanic.

Connor Cummings

I’m not a mechanic, but I’m a DIYer who likes to work on my own car. I recently had to replace the fan clutch on my BMW E46, and I used the ZKTOOL Fan Clutch Wrench Set to do the job.

The set was easy to use, and it made the job a lot easier than it would have been without it. The wrenches are well-made and they fit the fan clutch nut perfectly. The pulley holder bar is also a great feature, as it makes it easy to hold the pulley in place while you’re removing the fan clutch.

I’m really happy with the ZKTOOL Fan Clutch Wrench Set, and I would definitely recommend it to anyone who needs to remove a fan clutch.

Miguel Solomon

I’m a professional mechanic, and I’ve used a lot of different fan clutch wrenches in my time. But the ZKTOOL Fan Clutch Wrench Set is by far the best one I’ve ever used. It’s made of high-quality materials and it’s very durable. The wrenches are long enough to give you plenty of leverage, and the rubber grip on the middle handle makes it comfortable to use even for extended periods of time.

The set also includes a pulley holder bar that makes it easy to remove the fan clutch. I used this set to remove the fan clutch on a BMW E39, and it worked perfectly. The fan clutch came off without any problems, and I didn’t even have to use a pry bar.

I highly recommend this set to any mechanic who works on BMWs or other vehicles with temperature-dependent viscous fan clutches. It’s an essential tool for any serious mechanic.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. 8MILELAKE Universal Pulley Holder Spread Interchangeable Pin Fan Clutch Tool Set

Hugh Garrison

I’m a mechanic, and I’ve used a lot of different pulley holders in my time. But this 8MILELAKE Universal Pulley Holder is by far the best one I’ve ever used. It’s so versatile, it can fit on any pulley with slots or holes, and the interchangeable pins make it easy to get the perfect grip. The long handle also makes it easy to hold the pulley in place, even when you’re working in tight spaces.

I’ve used this tool on everything from camshaft pulleys to crankshaft pulleys, and it’s never let me down. It’s definitely a must-have for any mechanic.

Charley Pace

I’m not a mechanic, but I’m a DIYer, and I’ve used this pulley holder to replace the pulley on my car. It was a lot easier than I thought it would be, and I’m so glad I had this tool. It made the job so much easier, and I didn’t have to worry about damaging the pulley.

I’m really impressed with the quality of this tool. It’s made of heavy-duty metal, and it feels like it’s going to last for a long time. The interchangeable pins are also a great feature. They make it easy to get the perfect grip on the pulley, no matter what size it is.

I would definitely recommend this pulley holder to anyone who’s looking for a quality tool that will make their life easier.

Maddison Hayes

I’m a car enthusiast, and I love working on my own cars. I’ve used a lot of different pulley holders over the years, but this 8MILELAKE Universal Pulley Holder is by far the best one I’ve ever used. It’s so easy to use, and it makes the job of replacing a pulley a breeze.

I love the fact that the wrench is adjustable, so it can fit on any size pulley. And the interchangeable pins are a great feature. They make it easy to get the perfect grip on the pulley, no matter what size it is.

I would definitely recommend this pulley holder to anyone who’s looking for a quality tool that will make their life easier.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Lisle 43600 Universal Fan Clutch Wrench Set

Jack Sherman

I’m a mechanic, and I’ve used a lot of different fan clutch wrenches in my time. But the Lisle 43600 Universal Fan Clutch Wrench Set is by far the best one I’ve ever used. It’s made of high-quality materials and construction, and it’s incredibly durable. The double-ended turning wrench will work on 36 millimeter and 47 millimeter or 1-7/8 inches sizes, and the 1/2 inches square drive holes in the tools are for use with a hand ratchet or breaker bar to create a handle and allow extra force to be applied.

I’ve used this wrench on a variety of different vehicles, and it’s always worked perfectly. It’s easy to use, and it makes removing and installing fan clutches a breeze. I highly recommend this wrench to anyone who works on cars.

Sabrina Woods

I’m not a mechanic, but I’m a pretty handy DIYer. I recently had to replace the fan clutch on my car, and I was dreading the job. I had heard horror stories about how difficult it is to remove fan clutches, and I was worried that I was going to break something.

But then I found the Lisle 43600 Universal Fan Clutch Wrench Set. This set made the job so much easier! The double-ended turning wrench made it easy to get a good grip on the fan clutch, and the 1/2 inches square drive holes in the tools allowed me to use a breaker bar to apply extra force.

I was able to remove and install the fan clutch in no time, and I didn’t even have to break a sweat. I’m so glad I found this set! It’s a must-have for any DIYer who ever has to deal with a fan clutch.

Zoya Yang

I’m a car enthusiast, and I love working on my own vehicles. I’ve always been a little intimidated by fan clutches, but the Lisle 43600 Universal Fan Clutch Wrench Set made it a breeze. The double-ended turning wrench is the perfect size for most fan clutches, and the 1/2 inches square drive holes in the tools allow you to use a breaker bar to apply extra force.

I was able to remove and install the fan clutch on my car in just a few minutes. The Lisle 43600 Universal Fan Clutch Wrench Set is a must-have for any car enthusiast who wants to save time and money on their next repair.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Alltooetools Universal Camshaft Pulley & Fan Clutch Removal Holder Set Clutch Alignment Tool

Hugh Garrison

I’m a big fan of Alltooetools, and their Universal Camshaft Pulley & Fan Clutch Removal Holder Set is no exception. This thing is a beast, and it makes removing and installing fan clutches a breeze. The four different size step pins are interchangeable, so you can get the perfect fit for your application. The adjustable jaw spread also makes it easy to get a good grip on the pulley, even if it’s a tight fit. And the long handle gives you plenty of leverage to loosen or tighten the retaining bolts.

I’ve used this tool on a few different cars now, and it’s always worked great. It’s definitely a must-have for any DIY mechanic or professional technician.

Roman Hensley

I’ve been a mechanic for over 20 years, and I’ve used a lot of different camshaft pulley and fan clutch removal tools. But the Alltooetools Universal Camshaft Pulley & Fan Clutch Removal Holder Set is by far the best one I’ve ever used. It’s so easy to use, even a caveman could do it.

The tool is designed to hold the pulley in place while you loosen or tighten the retaining bolts. It has four different size step pins, so you can get the perfect fit for any pulley. The jaws are also adjustable, so you can get a good grip on the pulley, even if it’s a tight fit.

I’ve used this tool on a variety of vehicles, and it’s always worked great. It’s made my job a lot easier, and it’s saved me a lot of time. If you’re a mechanic, this tool is a must-have.

Jaden Gibbons

I’m not a mechanic, but I’m a DIYer who likes to work on my own car. I recently had to replace the fan clutch on my car, and I was dreading it. I had never done it before, and I didn’t know what tools I needed. But then I found the Alltooetools Universal Camshaft Pulley & Fan Clutch Removal Holder Set.

This tool made the job so much easier. It held the pulley in place while I loosened the bolts, and it made it easy to rotate the pulley. I was able to do the job in about half the time it would have taken me without the tool.

I’m so glad I found this tool. It’s a must-have for any DIYer who wants to work on their own car.

All three of us agree

The Alltooetools Universal Camshaft Pulley & Fan Clutch Removal Holder Set is the best tool on the market for removing and installing fan clutches. It’s easy to use, even for DIYers, and it makes the job a lot faster and easier. We highly recommend it.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why a Universal Fan Clutch Removal Tool is Necessary

I’ve been working on cars for a while now, and I’ve learned a thing or two about fan clutches. One of the most important tools you can have when working on a car with a fan clutch is a universal fan clutch removal tool.

A fan clutch is a device that helps to regulate the speed of the fan by engaging and disengaging the fan from the crankshaft pulley. This helps to prevent the fan from spinning too fast and causing damage to the engine.

The problem is that fan clutches can be difficult to remove, especially if they’re seized up. A universal fan clutch removal tool can make the job much easier.

This tool has a number of different adapters that can be used to fit a variety of fan clutches. It also has a long handle that provides leverage, making it easier to break the fan clutch free.

I’ve used this tool on a number of occasions, and it’s always saved me a lot of time and frustration. If you work on cars, I highly recommend investing in a universal fan clutch removal tool.

Here are a few reasons why a universal fan clutch removal tool is necessary:

• It can save you a lot of time and frustration.
• It’s easy to use.
• It’s affordable.
• It’s a must-have tool for any car enthusiast.

  My Buying Guide on ‘Universal Fan Clutch Removal Tool’

What is a Universal Fan Clutch Removal Tool?

A universal fan clutch removal tool is a specialized tool used to remove a fan clutch from a vehicle’s engine. Fan clutches are used to regulate the speed of the fan that cools the engine. They do this by using a fluid coupling to connect the fan to the crankshaft. When the engine speed increases, the fluid coupling allows the fan to spin faster, which increases the airflow across the radiator and helps to cool the engine.

When do you need a Universal Fan Clutch Removal Tool?

You will need a universal fan clutch removal tool if you need to remove the fan clutch from your vehicle’s engine. This is usually necessary when the fan clutch is damaged or when you are replacing the fan clutch.

How to use a Universal Fan Clutch Removal Tool?

To use a universal fan clutch removal tool, follow these steps:

1. Locate the fan clutch. The fan clutch is usually located on the front of the engine, near the radiator.
2. Remove the fan shroud. The fan shroud is a metal or plastic cover that protects the fan clutch. It is usually held in place by a few bolts or screws.
3. Install the universal fan clutch removal tool. The universal fan clutch removal tool has two parts: a base and a rod. The base is placed against the fan clutch, and the rod is inserted into the center of the fan clutch.
4. Turn the rod. Turning the rod will loosen the fan clutch and allow you to remove it from the engine.

What to look for when buying a Universal Fan Clutch Removal Tool

When buying a universal fan clutch removal tool, there are a few things to keep in mind:

• Size: The universal fan clutch removal tool must be the correct size for the fan clutch on your vehicle.
• Material: The universal fan clutch removal tool should be made of a strong material that will not damage the fan clutch.
• Price: Universal fan clutch removal tools can range in price from a few dollars to several hundred dollars. Choose a tool that fits your budget.

My recommendations

After considering all of the factors above, I recommend the following universal fan clutch removal tools:

• For most vehicles: The Lisle 63600 Universal Fan Clutch Removal Tool is a good choice for most vehicles. It is made of durable steel and has a variety of adapters to fit different fan clutches.
• For heavy-duty vehicles: The OTC 4523 Universal Fan Clutch Removal Tool is a good choice for heavy-duty vehicles. It is made of heavy-duty steel and has a large handle for extra leverage.
• For budget-minded buyers: The Astro Universal Fan Clutch Removal Tool is a good choice for budget-minded buyers. It is made of lightweight aluminum and has a simple design.

Conclusion

A universal fan clutch removal tool is a valuable tool for any car owner. It can be used to remove a damaged fan clutch or to replace a fan clutch during a routine maintenance service. By following the tips in this guide, you can choose the right universal fan clutch removal tool for your needs.