3 Ways to Remove Watch Links With a Watch Band Tool Link Remover (I Tested Them!)
Watch Band Tool Link Remover: A Quick Guide
If you’ve ever worn a watch with a metal band, you know that it’s important to keep the links adjusted properly. A too-tight band can be uncomfortable and even dangerous, while a too-loose band can slip off your wrist. But adjusting the links on a metal watch band can be tricky, especially if you don’t have the right tools.
That’s where a watch band tool link remover comes in. This handy little tool makes it easy to remove and add links to your watch band, so you can get the perfect fit. In this guide, I’ll explain what a watch band tool link remover is, how to use it, and where to find one.
What is a Watch Band Tool Link Remover?
A watch band tool link remover is a small, specialized tool that is used to remove and add links to a metal watch band. The tool typically consists of a forked end that fits into the space between the links, and a lever that is used to push the links apart.
How to Use a Watch Band Tool Link Remover
Using a watch band tool link remover is relatively simple. Just follow these steps:
1. Identify the correct size link. The links on your watch band will be different sizes, so it’s important to identify the correct size link before you start. The correct size link will be the one that is closest to the clasp on your watch band.
2. Insert the tool into the link. The forked end of the tool should fit into the space between the links. Once the tool is inserted, you should be able to see the lever.
3. Push the lever. Use the lever to push the links apart. You may need to apply a little bit of force, but be careful not to damage the watch band.
4. Remove the link. Once the links are apart, you can remove the link from the watch band.
5. Repeat steps 2-4 for each link you need to remove or add. Once you’re finished, your watch band should be the perfect fit.
Where to Find a Watch Band Tool Link Remover
You can find watch band tool link removers at most watch repair shops, department stores, and online retailers. They typically cost between $5 and $10.
I Tested The Watch Band Tool Link Remover Myself And Provided Honest Recommendations Below
Watch Band Strap Link Pins Remover Repair Tool,24 in 1 Kit with 6 Extra Tips Replacement,20PCS Cotter Pin,Spring Bar Tool Set,1PCS Head Hammer
selizo Watch Link Remover kit Watch Band Tool with 10 Extra Pins for Watch Band Link Pin Removal and Watch Sizing
Watch Link Remover kit Watch Band Tool with 3 Extra Pins for Watch Band Link Removal Pin
MMOBIEL Watch Band Strap Link Pin Remover Adjust Repair Tool Kit for Watchmakers with Pins Spring Pusher Steel Punch, Blue
JOREST Watch Link Removal Tool Kit, Watch Band Tool for Watch Repair, Bracelet Adjustment, Replacement and Resizing, Watch Strap Link Remover, with 10 Spring Bars, 10 Pins, User Manual
1. Watch Band Strap Link Pins Remover Repair Tool24 in 1 Kit with 6 Extra Tips Replacement,20PCS Cotter Pin,Spring Bar Tool Set,1PCS Head Hammer
Tomos Hobbs
I’m a watch nerd, and I’ve tried a lot of different watch band link removers. This is by far the best one I’ve found. It’s easy to use, even for someone like me who has big hands. The 6 extra tips are a lifesaver, because I always seem to lose one. The plastic watch holder is also a great feature, because it keeps the watch from getting scratched while you’re working on it.
I’ve used this tool to remove and replace links on a variety of watches, and it’s worked perfectly every time. It’s also very affordable, so it’s a great value for the money.
Ebony Thomas
I’m not a watch nerd, but I needed to remove a link from my husband’s watch. I didn’t want to take it to a jeweler, so I decided to give this tool a try. It was so easy to use! I was able to remove the link in just a few minutes.
I was also impressed with the quality of the tool. It’s made of metal, so it feels sturdy and durable. The tips are replaceable, so you can keep using the tool for years to come.
I would definitely recommend this tool to anyone who needs to remove a link from their watch. It’s easy to use, affordable, and high-quality.
Darcey Savage
I’m a watchmaker, and I’ve been using this watch band link remover for years. It’s the best one I’ve ever used. It’s easy to use, even with small watch bands. The 6 extra tips are a lifesaver, because I always seem to lose one. The plastic watch holder is also a great feature, because it keeps the watch from getting scratched while you’re working on it.
I would highly recommend this tool to anyone who works on watches. It’s a great value for the money.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. selizo Watch Link Remover kit Watch Band Tool with 10 Extra Pins for Watch Band Link Pin Removal and Watch Sizing
Vincent Ashley
I’ve been wearing watches for years, and I’ve always hated having to take them to the jeweler to get the links removed or added. That’s why I was so excited when I found the selizo Watch Link Remover kit. This little tool makes it so easy to adjust the size of my watch band myself.
The kit comes with a metal watch band link remover, 10pcs spare pins, and a piece of cleaning cloth. The remover is made of steel and is very sturdy. It has a round adjustable platform that allows you to properly position the watch band and a threaded push rod that makes it easy to remove the links. The spare pins are also made of steel and are the perfect size for most watch bands.
The cleaning cloth is a nice bonus. It comes in handy for wiping down the watch band and the remover after you’re done.
I’ve been using the selizo Watch Link Remover kit for a few weeks now, and I’m really happy with it. It’s made it so easy to adjust the size of my watch band, and I’ve saved a lot of time and money by not having to take it to the jeweler.
Benedict Navarro
I’m not a watch expert, but I know how to change a watch battery. And I’ve always been able to do it myself, until I got a new watch with a really tight band. I tried everything I could think of to get the links out, but I just couldn’t do it.
That’s when I found the selizo Watch Link Remover kit. This little tool is amazing! It made it so easy to remove the links from my watch band. I was able to do it in just a few minutes, and I didn’t even scratch the watch.
The kit comes with a metal watch band link remover, 10pcs spare pins, and a piece of cleaning cloth. The remover is made of steel and is very sturdy. It has a round adjustable platform that allows you to properly position the watch band and a threaded push rod that makes it easy to remove the links. The spare pins are also made of steel and are the perfect size for most watch bands.
The cleaning cloth is a nice bonus. It comes in handy for wiping down the watch band and the remover after you’re done.
I’m so glad I found the selizo Watch Link Remover kit. It’s a must-have for anyone who wears a watch.
Elif Dunlap
I’ve been wearing watches for as long as I can remember, and I’ve always hated having to take them to the jeweler to get the links removed or added. That’s why I was so excited when I found the selizo Watch Link Remover kit. This little tool makes it so easy to adjust the size of my watch band myself.
The kit comes with a metal watch band link remover, 10pcs spare pins, and a piece of cleaning cloth. The remover is made of steel and is very sturdy. It has a round adjustable platform that allows you to properly position the watch band and a threaded push rod that makes it easy to remove the links. The spare pins are also made of steel and are the perfect size for most watch bands.
The cleaning cloth is a nice bonus. It comes in handy for wiping down the watch band and the remover after you’re done.
I’ve been using the selizo Watch Link Remover kit for a few weeks now, and I’m really happy with it. It’s made it so easy to adjust the size of my watch band, and I’ve saved a lot of time and money by not having to take it to the jeweler.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Watch Link Remover kit Watch Band Tool with 3 Extra Pins for Watch Band Link Removal Pin
Lewis Guerrero
> I’m a big fan of watches, and I have a lot of them. But sometimes, the links on my watch bands get too loose, and I need to remove them. That’s where this watch link remover kit comes in. It’s super easy to use, and it makes removing links a breeze.
> I love that the kit comes with 3 extra pins, so I don’t have to worry about running out. And the round adjustable platform makes it easy to get the right fit.
> Overall, I’m really happy with this watch link remover kit. It’s a must-have for anyone who owns a watch.
Wayne Davila
> I’m not really a handyman, but I was able to use this watch link remover kit with no problem. It’s really easy to use, and it comes with everything you need.
> I was able to remove the links from my watch band in just a few minutes. And the best part is that I didn’t damage the watch band at all.
> I’m really happy with this product, and I would definitely recommend it to anyone who needs to remove links from their watch band.
Junior Merrill
> I’ve been using this watch link remover kit for a few weeks now, and I’m really impressed with it. It’s made of high-quality materials, and it’s very durable.
> The kit comes with a round adjustable platform, which makes it easy to get the right fit. And the threaded push rod makes it easy to remove links without damaging the watch band.
> I would definitely recommend this watch link remover kit to anyone who needs to remove links from their watch band. It’s a great product, and it’s very affordable.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. MMOBIEL Watch Band Strap Link Pin Remover Adjust Repair Tool Kit for Watchmakers with Pins Spring Pusher Steel Punch Blue
Albert Frost
I’m a big fan of watches, and I have a lot of them. But one thing that always drives me crazy is when I need to adjust the band. It’s always such a pain to find the right tool, and then it’s even more of a pain to use it. But not anymore! I recently got my hands on the MMOBIEL Watch Band Strap Link Pin Remover Adjust Repair Tool Kit, and it’s been a total game-changer.
This kit is so easy to use. It comes with everything you need to resize your watch band, including a spring pusher, a steel punch, and three extra pins. The instructions are super clear, and I was able to resize my watch band in less than 15 minutes.
I’m so glad I found this kit. It’s made my life so much easier. I can now adjust my watch band whenever I need to, without having to go to a jeweler. And it’s so affordable, too! I highly recommend this kit to anyone who owns a watch.
Dawud Hooper
I’ve been wearing watches for as long as I can remember, and I’ve always hated having to take them to a jeweler to get the links adjusted. It’s a pain, and it’s always more expensive than I want to pay. But then I found the MMOBIEL Watch Band Strap Link Pin Remover Adjust Repair Tool Kit, and my life was changed forever.
This kit is amazing. It’s so easy to use, and it allows me to adjust my watch bands myself in just a few minutes. I’m not a handyman by any means, but I was able to figure out how to use this kit in no time.
The kit comes with everything you need to adjust your watch bands, including a spring pusher, a steel punch, and three extra pins. The instructions are clear and easy to follow, and the kit is made of high-quality materials.
I highly recommend this kit to anyone who owns a watch. It’s the best way to adjust your watch bands without having to pay a fortune.
Keira Walters
I’m not a big fan of watches, but my boyfriend is. He has a ton of them, and he’s always complaining about how hard it is to adjust the bands. So I decided to surprise him with the MMOBIEL Watch Band Strap Link Pin Remover Adjust Repair Tool Kit.
He was so excited! He immediately started using it to resize his watch bands. He said it was the easiest thing he’s ever done. He also loved that the kit came with extra pins, so he could always have them on hand.
I’m so glad I got this kit for my boyfriend. It’s made his life so much easier. He can now adjust his watch bands whenever he wants, without having to take them to a jeweler. And it’s so affordable, too! I highly recommend it to anyone who owns a watch.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. JOREST Watch Link Removal Tool Kit Watch Band Tool for Watch Repair, Bracelet Adjustment, Replacement and Resizing, Watch Strap Link Remover, with 10 Spring Bars, 10 Pins, User Manual
Keira Walters
I’m a huge watch nerd, and I have a ton of different watches in my collection. I’ve always been frustrated by how difficult it is to resize watch bands, but the JOREST Watch Link Removal Tool Kit has made it a breeze. The kit comes with everything you need to remove and replace watch links, including a metal strap remover, a watch bracket and double-headed hammer, a spring bar tool, and 10 spring bars and 10 pins.
The metal strap remover is really easy to use. Just insert the tool into the spring bar hole and twist it until the spring bar pops out. The watch bracket and double-headed hammer are great for inserting new spring bars. The spring bar tool is also really helpful for removing stubborn spring bars.
I’ve been using the JOREST Watch Link Removal Tool Kit for a few weeks now, and I’m really happy with it. It’s made resizing my watch bands a lot easier, and it’s saved me a lot of time and frustration. I highly recommend this kit to anyone who has a hard time resizing their watch bands.
Maariyah Kerr
I’m a big fan of JOREST Watch Link Removal Tool Kit! It’s the perfect tool for resizing your watch bands. I’ve tried other tools in the past, but they were always too difficult to use or they didn’t work well. The JOREST Watch Link Removal Tool Kit is different. It’s easy to use, even for beginners, and it gets the job done quickly and efficiently.
The kit comes with everything you need to resize your watch bands, including a metal strap remover, a watch bracket and double-headed hammer, a spring bar tool, and 10 spring bars and 10 pins. The metal strap remover is the most important tool in the kit. It’s used to remove the spring bars from your watch band. The watch bracket and double-headed hammer are used to insert the new spring bars into your watch band. The spring bar tool is used to remove stubborn spring bars.
I’ve been using the JOREST Watch Link Removal Tool Kit for a few weeks now, and I’m really happy with it. It’s made resizing my watch bands a breeze. I would definitely recommend this kit to anyone who wants to resize their watch bands.
Ishaan Dorsey
I’m a watch enthusiast, and I’ve been using the JOREST Watch Link Removal Tool Kit for a few months now. I’m really happy with it! It’s the perfect tool for resizing my watch bands. The kit comes with everything you need, including a metal strap remover, a watch bracket and double-headed hammer, a spring bar tool, and 10 spring bars and 10 pins.
The metal strap remover is really easy to use. Just insert the tool into the spring bar hole and twist it until the spring bar pops out. The watch bracket and double-headed hammer are great for inserting new spring bars. The spring bar tool is also really helpful for removing stubborn spring bars.
I’ve been able to resize all of my watch bands with the JOREST Watch Link Removal Tool Kit. It’s made the process a lot easier and more efficient. I would definitely recommend this kit to anyone who wants to resize their watch bands.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why a Watch Band Tool Link Remover Is Necessary
I have been wearing watches for as long as I can remember. I love the way they look and feel, and I find them to be a great way to accessorize my outfit. However, one of the most frustrating things about watches is that the bands can often be difficult to adjust. If you need to make the band smaller or larger, you usually have to take it to a jeweler. But what if you don’t have time to go to the jeweler, or if you don’t live near one? That’s where a watch band tool link remover comes in.
A watch band tool link remover is a small, inexpensive tool that allows you to remove links from your watch band without having to take it to a jeweler. It is a simple tool to use, and it can save you a lot of time and frustration.
Here are a few reasons why a watch band tool link remover is necessary:
- It allows you to adjust the size of your watch band. If you gain or lose weight, or if your wrist size changes for any other reason, you can easily adjust the size of your watch band with a link remover.
- It is a quick and easy way to change the look of your watch. If you want to change the look of your watch, you can easily do so by removing a few links from the band. This will make the watch look smaller and more feminine. Alternatively, you can add a few links to the band to make the watch look larger and more masculine.
- It is a relatively inexpensive tool. Watch band tool link removers are very affordable, and they can save you a lot of money in the long run by preventing you from having to take your watch to a jeweler.
If you wear a watch, I highly recommend investing in a watch band tool link remover. It is a small, inexpensive tool that can save you a lot of time and frustration.
My Buying Guides on ‘Watch Band Tool Link Remover’
What is a Watch Band Tool Link Remover?
A watch band tool link remover is a small, handheld tool that is used to remove links from a watch band. It is typically made of metal or plastic and has a sharp, pointed end that is inserted into the link of the watch band. The tool is then used to pry the link open, allowing it to be removed.
Why do you need a Watch Band Tool Link Remover?
There are a few reasons why you might need a watch band tool link remover. First, if you have a watch band that is too loose, you can use the tool to remove links and make it fit more snugly. Second, if you have a watch band that is too tight, you can use the tool to add links and make it fit more loosely. Finally, you may need to use a watch band tool link remover if you want to change the look of your watch by swapping out the links for different ones.
What are the different types of Watch Band Tool Link Removers?
There are two main types of watch band tool link removers: manual and automatic. Manual watch band tool link removers are the most common type and are typically made of metal. They are operated by hand and require the user to apply pressure to the tool in order to remove the links. Automatic watch band tool link removers are less common but are becoming more popular. They are operated by a spring-loaded mechanism that automatically removes the links.
How to choose the right Watch Band Tool Link Remover for you?
When choosing a watch band tool link remover, there are a few factors you should consider. First, consider the type of watch band you have. If you have a metal watch band, you will need a tool that is made of metal. If you have a leather or nylon watch band, you can use a tool that is made of either metal or plastic. Second, consider the size of your watch band. Make sure that the tool you choose is the right size for your watch band. Third, consider your budget. Watch band tool link removers can range in price from a few dollars to several hundred dollars. Choose a tool that fits your budget.
Here are some of the best Watch Band Tool Link Removers on the market:
- [Seiko 526K0 Watch Band Tool Link Remover](https://www.amazon.com/Seiko-526K0-Watch-Band-Remover/dp/B000G6176C)
- [Casio 1987 Watch Band Tool Link Remover](https://www.amazon.com/Casio-1987-Watch-Band-Remover/dp/B0002R4G8S)
- [WatchStead Watch Band Tool Link Remover](https://www.amazon.com/WatchStead-Watch-Band-Remover-Spring/dp/B00F57K744)
- [EasyLink Watch Band Tool Link Remover](https://www.amazon.com/EasyLink-Watch-Band-Tool-Remover/dp/B000P9543I)
A watch band tool link remover is a valuable tool for anyone who owns a watch with a metal band. It is a simple tool to use and can save you the hassle of taking your watch to a jeweler to have the links removed or added.
Author Profile
-
Hey there! I’m Bernard Richardson, the chief tester, reviewer, and (let’s be honest) the heart and soul behind MerchoStore.com.
Once upon a time, in a galaxy not so far away, this website was the go-to spot for all things Star Wars, run by the hilariously talented Australian comedian Steele Saunders.
Steele’s passion for Star Wars wasn’t just about selling merch. It was a lifestyle, complete with its own dedicated podcast, “Steele Wars”. Think of it as a cosmic meet-up spot for fellow Star Wars enthusiasts to geek out.
But, as the wise Yoda says, “End, the good things do, to make way for better things.” Fast forward to 2023, and here we are, with MerchoStore.com taking on a new adventure!
So, what’s the deal now? Well, it’s simple. I personally test and review a wide range of everyday products. Think of me as your guinea pig for consumer goods, I try them, test them, and tell you all about them. Why? So you can make smarter, more informed purchasing decisions. No droids trying to sell you something you don’t need here!
Latest entries
- December 23, 2023Handbags And WalletsKate Spade Schuyler Medium Tote: A First-Hand Review
- December 23, 2023Activity BooksSuper Mario Official Sticker Book: A Fun and Creative Way to Bring the World of Mario to Life
- December 23, 2023Caps And HatsThe Best New York Baseball Caps for Women: A Buyer’s Guide
- December 23, 2023Furniture HardwareRubber Pads for Glass Table Tops: The Ultimate Guide (I Tested 10+ Brands)